Bracing Systems Bracing Systems
1 1
Bracing Systems Bracing Systems 1 1 Rod Bracing Rod Bracing 2 - - PowerPoint PPT Presentation
Bracing Systems Bracing Systems 1 1 Rod Bracing Rod Bracing 2 2 Wind Bracing Systems Wind Bracing Systems HOW BRACING WORKS 3 3 Wind Bracing Systems Wind Bracing Systems Wind Bracing Systems Wind Bracing Systems Load Dispersal
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
19 19
If possible, keep endpost spacing If possible, keep endpost spacing similar similar at each endwall for a more at each endwall for a more efficient bracing pattern. efficient bracing pattern.
20 20
21 21
VP standard bracing utilizes Diagonal Bracing in the Roof and Walls. Bracing in the Roof and Walls.
The bracing design is determined by:
Building Loads & Code
Building Size
Building Location
22 22
Stiffest bracing system available
Most economical bracing system
23 23
Eave Floor
24 24
25 25
26 26
Eave Floor
27 27
28 28
29 29
Bracing may be single rods or angles depending upon angles depending upon loading/design loading/design
30 30
31 31
32 32
33 33
34 34
35 35
36 36
37 37
Inexpensive
Maximum building width of 50’
Maximum eave height of 18’
100 mph maximum wind speed
Minimum 3 bays
Call your Service Center if close close to these to these parameters parameters
38 38
39 39
40 40
Portal Beam
Knee Braces
Additional column support support
41 41
42 42
43 43
44 44
Bracing Bracing
New Bracing Option New Bracing Option
Fixed Base Wind Post (with automated Wind Post Base automated Wind Post Base Plate Design) Plate Design)
Use at sidewalls or endwalls
35’-
0” max. eave height
Connection at main frame is similar to that of portal frame similar to that of portal frame
44
Automated diaphragm check
If fails Rods may automatically be designed designed
Initially at interior bay
Then at endbay endbay
45 45
46 46
47 47
48 48
49 49
50 50
Portal Frame Beam
Portal Frame Columns
Load Transfer Clips
Bolts and Nuts
51 51
52 52
53 53
54 54
55 55
(can hold drift on frame)
(Hold column & rafter depths) (Hold column & rafter depths)
56 56
57 57
(typical Anchor Rod Detail) (typical Anchor Rod Detail)
58 58
Combination of Rods and Portal Frame
May be more for building heights above 20’ tall. above 20’ tall.
59 59
Eave Floor
60 60
(Building Size = 200 x 300 x 19, I BC, 85 MPH (Building Size = 200 x 300 x 19, I BC, 85 MPH Wind Wind -
Book Price Shown)
61 61
$0 $1,000 $2,000 $3,000 $4,000 $5,000 $6,000 $7,000 $8,000 Bracing Type Rods Portal Brace Portal Frame
62 62
63 63
64 64
65 65
66 66
67 67
As erection proceeds all Brace Rods, Flange Braces, Struts, Purlin/Girt Laps Flange Braces, Struts, Purlin/Girt Laps should be installed before proceeding. should be installed before proceeding.
All buildings will require some temporary bracing until all erection is temporary bracing until all erection is complete ! complete ! Do NOT take any chances ! Do NOT take any chances !
68 68
69 69
70 70
Bracing most effective at 45 degree
45 degree
angle angle
Diagonal bracing always most
always most economical economical
Consider I nterior Column Bracing
I nterior Column Bracing
at wide buildings at wide buildings
Consider “shear walls
shear walls” with masonry,
” with masonry, etc. etc.
71 71
72 72