Engineering Design (8023810-2) Dr. Mouaaz Nahas Final Presentation - PowerPoint PPT Presentation

Engineering Design (8023810-2) Dr. Mouaaz Nahas Final Presentation Template No. of #: Slide: Contents: Slides: 1. Title 1 Title Course Name & Course Number (e.g. Engineering Design (8023810-2)) Group Number Team Name & Number Team Members’ Names & ID’s Advisor: Dr Mouaaz Nahas Affiliation: Electrical Engineering Department , College of Engineering and Islamic Architecture , Umm Al-Qura University, Makkah, KSA Semester & Year (e.g. Semester 2, 1439-1440 H) 2. Outline 1 The outline or agenda of your presentation (in bullet points). 3. Introduction 1 The introduction to your presentation (in bullet points). You should include pictures(s). 4. Problem Statement 1 The problem statement (in paragraphs or summary in bullet points). 5. Problem Identification /Literature 1-2 The Problem Identification /Literature Review (in paragraphs or bullet Review points). 6. Problem Definition 1 The problem definition (in paragraphs or bullet points). 7. Objectives 1-2 The objectives (in bullet points). 8. Mission Statement 1-2 The mission statement (in table format).

• Identify your customer (Primary Market). 9. Customer Needs Identification 1-2 • How will you gather information to identify customer needs when you will implement the project? • What Electrical Engineering , Safety , Regulatory , Environmental 10. Associated Standards and Target 1-2 Specifications Standards did you consider for your project? • How did you transform customer needs into target specifications ? • What are your alternative concepts or ideas ? List them in the table format. 11. Design Concepts Generation 2-3 • How did your team generate these ideas or concepts? • Block diagrams of the concepts to explain each concept. • What are the Pre-Specified Selection Criteria ? 12. Design Concepts Selection 2-3 • Show Screening and Scoring Decision Matrices ? • What assumptions and realistic constraints did your team consider? 13. Conclusion 1 You have to conclude about what you have presented. • References must be in the known format (see this file). 14. References 1 • To generate the references automatically, see the Citation file. • Selective references only ( the full list should be in the report ). • The references [1] & [2] should be the following two references ( in the presentation and in the report ): [1] K. T. Ulrich and S. D. Eppinger, Product Design and Development . Boston: McGraw-Hill, 2000. [2] H. S. Fogler and S. E. LeBlanc, Strategies For Creative Problem Solving . NJ: Prentice Hall, 2008.

• You must have at least four other references in total. Here, in this presentation, at least two more references in addition to [1] and [2] above should be listed. 15. THANK YOU & ANY 1 This is to indicate the end of your presentation, and open the door for QUESTIONS? audience questions.