- Furigas started in 1972 as manufacturer of atmospheric burners. - - - PowerPoint PPT Presentation

furigas started in 1972 as manufacturer of atmospheric
SMART_READER_LITE
LIVE PREVIEW

- Furigas started in 1972 as manufacturer of atmospheric burners. - - - PowerPoint PPT Presentation

Secondment at Bekaert Company - Furigas started in 1972 as manufacturer of atmospheric burners. - Premixed technology + condensing boilers started in the 1980s - Driven by low NOx and higher efficiency demands - NIT was bought from


slide-1
SLIDE 1

Secondment at Bekaert Company

  • Furigas started in 1972 as manufacturer of atmospheric burners.
  • Premixed technology + condensing boilers started in the 1980’s
  • Driven by low NOx and higher efficiency demands
  • NIT was bought from Bekaert
  • 2000 acquisition : Bekaert Combustion Technology
  • Premixed technology is sensitive to thermo-acoustics instabilities
  • Since 2005 BTC has been developing a dedicated team in order to

predict and prevent thermo-acoustic noise

Confidential - only for TANGO project - Joan Teerling, Bekaert Combustion Technology, June 2013

slide-2
SLIDE 2

Secondment at Bekaert Location Assen, Drenthe, The Netherlands

1

Assen Eindhoven

Confidential - only for TANGO project - Joan Teerling, Bekaert Combustion Technology, June 2013

slide-3
SLIDE 3

Organisation

R&D Manager 4 Project managers Team manager + 6 Test Engineers 4 Workshop Project manager TA 2 Development Engineers Designer TANGO fellow

2 Confidential - only for TANGO project - Joan Teerling, Bekaert Combustion Technology, June 2013

slide-4
SLIDE 4

Secondment at Bekaert- Tools

  • ther tools

burner signature measurement 3D-modelling using Comsol

3

improve all tools in STW-project using existing boiler (i.e. Calenta 35s) with industrial and academic partners Measurements noise map impedance tube Modelling 1D/network-modelling (based on TNO-model)

Confidential - only for TANGO project - Joan Teerling, Bekaert Combustion Technology, June 2013

slide-5
SLIDE 5

Secondmen at Bekaert - Tools - Lab equipment Burner signature measurement

4

Frequency (Hz) Phase shift (Degrees) Frequency (Hz) Phase shift (Degrees)

Speaker

Premix

MFCs OH-sensor CTA

Setup 1-30kW

Confidential - only for TANGO project - Joan Teerling, Bekaert Combustion Technology, June 2013

slide-6
SLIDE 6

Secondment at Bekaert - Computational Engineering

5

Comsol

  • based on real / complex 3DCAD

geometries

  • Acoustic behaviour of passive

components

  • First tests for TA-modelling in

Comsol

Fluent

  • Heat transfer in heat exchangers
  • Gas flow in burners
  • First tests on combustion
  • TANGO fellow will continue work of

Manohar on modelling premixed burner and deriving TF

Confidential - only for TANGO project - Joan Teerling, Bekaert Combustion Technology, June 2013